| Customization: | Available |
|---|---|
| After-sales Service: | 1 Years |
| Warranty: | 1 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PFA gas washing bottle is a container for washing away impurities in the gas. It absorbs the impure gas through the selected suitable liquid medium (dissolved or due to chemical reaction), so as to wash away the impurity gas and purify the gas. Purpose. At the time of design, the surrounding of the PTFE ball is full of small holes.
Notice
1. The selected liquid is installed in the gas washing bottle to wash the gas and remove the water or other gas impurities. When using, pay attention to the flow direction of the gas, and the inlet pipe and the outlet pipe cannot be reversed;
2. The gas washing bottle cannot hold alkaline liquid detergent for a long time. After use, pour the detergent into a reagent bottle with a rubber stopper for storage and clean it with water. The bottle can also collect gas and calculate the volume of gas;
3. Under normal circumstances, the long tube enters and the short tube exits. The gas with a higher density than air is fed into the long tube, and the gas with a lower density than air is fed into the short tube (imperial tubes can also be processed);
4. Use the upward air discharge method to show that the collected gas is denser than air. Long in and short out can make the collected gas press out the air, if short in and long out the collected gas will run out directly from the long tube.
PFA gas washing bottle characteristics:
1. High and low temperature resistance: the operating temperature can reach -200~+205°C;
2. The appearance is transparent and colorless, visible;
3. No dissolution and precipitation, suitable for standard substances, highly corrosive samples, expensive high-purity reagent solutions;
4. Excellent chemical resistance, almost resistant to all chemical solvents
OEM service is available.
){kind=link}